Specifications

SHOW/MONITOR/LIST Commands
5-28
Keywords
PORT ALL
Specifies that the information for all ports session keymap be displayed.
PORT port-list
Displays sessions for the specified port (default: displays sessions for your current
port).
SESSION session-id
Identifies the session number to be displayed for the specified port. The current
session is the default if none is specified.
SESSION ALL
Displays all sessions for the specified ports.
The display is similar to the SHOW PORT TN3270 KEYMAP display except that
the EXTend ASCII mnemonic definition represented by EXT is displayed in the
session keymap display, not as EXT but as the ASCII mnemonic it represents. If
model 2 is entered using the SET PORT TN3270 MODEL command, both the EXIT
and HELP keys will operate as follows:
• The EXIT key aborts and disconnects the TN3270 session.
• The “hot-key” HELP displays a short form of the SHOW PORT SESSION
TN3270 KEYMAP display.
Refer to the IBM 3270 documentation for an explanation of the IBM function keys.
Changes to a port’s keymappings do not affect an established session’s
keymappings.
NOTE