Specifications

5-17
SHOW/MONITOR/LIST Commands
Reference
For a detailed description of the displays, refer the to Network Access Software
Management guide.
Keywords
ACCESS { type }
Specifies that information is displayed for those ports only with ACCESS set to
the type you choose (LOCAL, REMOTE, DYNAMIC, NONE). ACCESS is a port
characteristic specified with the SET/DEFINE/CHANGE PORT command.
ALL
Specifies that information for all ports is displayed.
port-list
Specifies one or more ports for which information is displayed (default: the port
you are using). For more information on specifying port-list, refer to Chapter 1 for
examples and conventions.
CHARACTERISTICS
Displays characteristics that can be set for the specified port. This is the default
when you specify no port, one port, or a port list.
COUNTERS
Displays current counter values for the specified port.
STATUS
Displays current port status for the specified port.
SUMMARY
Displays a one-line summary of information for the specified port, including port
number, accessibility, status, and local services. This is the default when you
specify ALL or ACCESS.
Restrictions
• MONITOR is a privileged command.
• Users on secure ports cannot include port designations (port-list, ALL, and
ACCESS) in these commands.
• When using the MONITOR command, your port type characteristic should be
set to ANSI; otherwise, the displayed information will scroll off the screen.