Specifications

SHOW/MONITOR/LIST Commands
5-6
DIALER SERVICE
(nonprivileged)
Syntax
Description
This nonprivileged command produces a display of one or all dialer services. A
user on a port with SECURITY enabled would not have access to the STATUS
display because it might provide access to unlisted or sensitive phone numbers
and other information received from the modem. In the second example below,
port 10 is currently available; the last phone number it dialed was found to be
busy. Ports 9 and 11 are presently in use. Port 13 is actually dialing a phone
number, while port 14 is waiting for a response from the modem. When the dialer
port is initialized prior to making a phone call, the Last Connection Status field is
cleared.
Examples: SHOW/MONITOR/LIST DIALER SERVICE
Local> SHOW DIALER AT_TRADESHOW CHAR
Dial Service: AT_TRADESHOW
Identification: Dial-back from tradeshow
Connections: Enabled
Ports: 1,2,9-14
Phone Number: 8-1-508-555-1234
Delay(seconds): 30 Mode: PPP
Username: Smith Password: None
Local> SHOW DIALER AT_TRADESHOW STATUS
Dial Service: AT_TRADESHOW - Available
Port User Status Last Connection Status
9 (remote) Connected CONNECTED 14400/LAPM
10 Available BUSY
11 Janice Decserver Connected CONNECTED 9600
12 Available NO ANSWER
13 Jim Dialing N
14 Elle Presidente Waiting
Local> SHOW DIALER AT_TRADESHOW COUNTERS
Dial Service: AT_TRADESHOW
Seconds Since Zeroed: 1989692 Failures: 17
Connections Attempted: 113 Busy: 10
Connections Completed: 96 No Answer: 0
No Response: 0
Authentication: 7