Specifications

4-135
SET/DEFINE/CHANGE Commands
SERVICE IDENTIFICATION
(privileged)
Syntax
Description
This privileged command specifies a brief description of the LAT service for the
access server to transmit in multicast messages to advertise the service (default:
no description is sent).
The id-string value is a string from 1 to 40 ASCII characters. To clear an
identification string, enter the command with a quoted null string (" ").
SERVICE PASSWORD
(privileged)
Syntax
Description
This privileged command specifies a LAT service access password that a user
must supply in order to establish a session with the LAT service. (The default is
set to no password required.)
You can omit the password value when PASSWORD is the only characteristic in
the command line. The access server then prompts you for the password. If no
value is entered for the password, pressing the carriage return (only) will clear the
password. To clear an existing password, enter the command line with a quoted
null string (" "). For more information on specifying passwords, refer to Chapter 1.