Specifications

SET/DEFINE/CHANGE Commands
4-130
SERVER SERVICE GROUPS
(privileged)
Syntax
Description
This privileged command specifies which groups are assigned to all locally
defined services and are enabled for the access server when it functions as a
service node (the default is 0 ENABLED, 1-255 DISABLED). Use the group-list
format with ENABLED or DISABLED to add groups to or remove groups from
the existing list. Specifying a value for group-list without the keywords ENABLED
or DISABLED will replace the existing list with a new one. Specify ALL to enable
or to disable all service groups.
Keywords
group-list
One or more decimal codes ranging in value from 0 to 255, each representing a
LAT group code. Specify multiple codes by separating individual numbers with
commas, by specifying a range of numbers (in ascending order), or a combination
of both. For example, the group list 1, 4-7, 9 specifies groups 1, 4, 5, 6, 7, and 9.
Restriction
This characteristic is used by the LAT protocol only.
SERVER SESSION LIMIT
(privileged)
Syntax
Description
This privileged command specifies the maximum number of active sessions that
the access server allows at one time. The range is 0 to 128; the default is default 64.
NONE means that the limit is equivalent to the maximum number of sessions
allowed on the access server.