Specifications

SET/DEFINE/CHANGE Commands
4-128
SERVER REMOTE PASSWORD
(privileged)
Syntax
Description
This privileged command specifies a password that remote users must enter
when they log in to the access server. You must also set the port characteristic
REMOTE PASSWORD to ENABLED for the password prompt to appear at port
login. For more information on specifying passwords, refer to Chapter 1.
You can omit the password value if REMOTE PASSWORD is the only
characteristic in the command line. The access server then prompts for the
password.
The default password is ACCESS. This default is in effect when the access server
is delivered and when you reset the access server characteristics to their default
values.
SERVER RESPONDER
(privileged)
Syntax
Description
This privileged command enables or disables the RESPONDER characteristic.
Keywords
RESPONDER
RESPONDER enables or disables the access servers ability to respond to solicit
information requests on behalf of other nodes.
ENABLED
In addition to responding to solicit information requests targeted to itself, the
access server may also respond to information requests on behalf of other nodes.
The access server will act as an agent for another node only if the local database
contains information about the specified service and node, and the access codes of
the requesting node intersect the access codes of the targeted node.