Specifications

SET/DEFINE/CHANGE Commands
4-126
SERVER PASSWORD LIMIT
(privileged)
Syntax
Description
This privileged command specifies the number of times a user can try to enter the
correct password for any password-protected access server operation. The range
is 1 to 10; the default is 3. For more information on specifying passwords, refer to
the description in Chapter 1.
SERVER PRIVILEGED PASSWORD
(privileged)
Syntax
Description
This privileged command specifies the password a user must enter following a
SET PRIVILEGED command to use privileged access server commands at the
port. You can omit the password value if PRIVILEGED PASSWORD is the only
characteristic in the command line. The access server then prompts for the
password. For more information on specifying passwords, refer to Chapter 1.
The default password is SYSTEM. This default is in effect when the access server
is delivered and when you reset the access server characteristics to their default
values.