Specifications

SET/DEFINE/CHANGE Commands
4-124
SERVER NAME - SERVER SOFTWARE
SERVER NAME
(privileged)
Syntax
Description
This privileged command specifies a 1- to 16-character name for the access server.
The default is LAT_nnnnnnnnnnnn, where each n represents one of the 12
hexadecimal characters in the Ethernet address of the access server.
Reference
You may need to set the access server name to match the DECnet node name for
the access server for networks running DECnet. For more information, refer to the
Cabletron Network Access Software Management guide.
Restriction
You cannot use the SET command with this parameter while sessions are active.
SERVER NODE LIMIT
(privileged)
Syntax
Description
This privileged LAT protocol command specifies the maximum number of LAT
service nodes that the access server maintains in its node database. The range is 1
to 2000. (The default is 200.) NONE implies no limit except the memory
constraints of the access server.