Specifications

SET/DEFINE/CHANGE Commands
4-122
SERVER LOCK
(privileged)
Syntax
Description
This privileged command specifies whether interactive port users can use the
LOCK command. (The default is ENABLED.)
SERVER LOGIN PASSWORD
(privileged)
Syntax
Description
This privileged command specifies a password that interactive users must enter
when they log in to the access server. You must also set the port characteristic
PASSWORD to ENABLED for the password prompt to appear at port login. For
more information on specifying passwords, refer to Chapter 1.
You can omit the password value if LOGIN PASSWORD is the only characteristic
in the command line. The access server then prompts for the password.
The default password is ACCESS. This default is in effect when the access server
is delivered and when you reset the access server characteristics to their default
values.