Specifications

4-121
SET/DEFINE/CHANGE Commands
Restriction
You cannot use the SET command with this parameter while any LAT session is
active.
SERVER INACTIVITY TIMER
(privileged)
Syntax
Description
This privileged command determines the timeout period for ports having the
port characteristic INACTIVITY LOGOUT when ENABLED (range: 1 to 120
minutes; default: 30). The timer determines the length of time that a local access
port can be logged in without local user input or output. The timer also
determines the length of time that a remote access port can be logged in when
there is no activity for a session at that port. No timeout occurs if any sessions are
active on the port.
SERVER KEEPALIVE TIMER
(privileged)
Syntax
Description
This privileged LAT protocol command specifies the interval between messages
for LAT circuits on which no data is being transmitted (range: 10 to 180 seconds;
default: 20).
Restriction
You cannot use the SET command with this parameter while any LAT sessions are
active.