Specifications

SET/DEFINE/CHANGE Commands
4-118
SERVER - SERVER MULTICAST TIMER
SERVER
(privileged)
Syntax
Description
This privileged command specifies access server characteristics.
Restriction
You cannot change some access server characteristics using a SET command while
any sessions are active (or queued) on the access server. Throughout this section,
such characteristics are identified with a restriction to that characteristic.
Examples: SET/DEFINE /CHANGE SERVER CHARACTERISTIC
Local> DEFINE server IDENTIFICATION “TECHSALES OFC4”
This command defines an identification for the access server.
Local> SET server CIRCUIT 60 KEEPALIVE 30
This command reassigns values for the circuit timer and the keepalive timer.
These values revert to the values in the permanent database when the access
server is reinitialized.
SERVER ANNOUNCEMENTS
(privileged)
Syntax
Description
This LAT protocol command specifies whether the access server sends LAT
multicast messages over the Ethernet to announce the availability of local services
(default: ENABLED). No announcements are sent if no local services are defined.