Specifications

4-105
SET/DEFINE/CHANGE Commands
PORT TN3270 TERMINAL
(nonprivileged)
Syntax
Description
A nonprivileged option that tells the access server which terminal type is
connected to each port.
The parameter t-name can be a customized name defined in the server’s TN3270
TERMINAL LIST. See SHOW TN3270 TERMINAL.
Setting a PORT to a VT100 or ANSI terminal will set the TN3270 KEYMAP to a
VT100 KEYMAP. Setting a port to either a VT220, VT320, or VT420 terminal will
set the TN3270 KEYMAP to a VT220 KEYMAP. If executing this command selects
the same keymap (VT100 or VT200) as the currently selected one, the customized
key mappings (if any) are retained. Otherwise, all customized KEYMAPs will be
lost. The default is VT100.
PORT TN3270 VERIFICATION
(secure)
Syntax
Description
An option that specifies whether the access server sends informational messages
to you when you connect, disconnect, or switch sessions (default: ENABLED).