Specifications

SET/DEFINE/CHANGE Commands
4-96
ASCII Code Mnemonics Table
The following table shows the ASCII code mnemonics for defining the TN3270-
function. Each mnemonic represents an ASCII character sequence.
Mnemonic
Hexadecimal
Sequence
ASCII
Character
Sequence
Comments
CTRL/A 1 SOH 7-bit control
characters
CTRL/B 2 STX 7-bit control
characters
CTRL/C 3 ETX 7-bit control
characters
CTRL/D 4 EOT 7-bit control
characters
CTRL/E 5 ENQ 7-bit control
characters
CTRL/F 6 ACK 7-bit control
characters
CTRL/G 7 BEL 7-bit control
characters
CTRL/H or
BACKSPACE
8 BS 7-bit control
characters
CTRL/I or TAB 9 HT 7-bit control
characters
CTRL/J or LINEFEED A LF 7-bit control
characters
CTRL/K B VT 7-bit control
characters
CTRL/L C FF 7-bit control
characters
CTRL/M or RETURN D CR 7-bit control
characters
CTRL/N E SO 7-bit control
characters
CTRL/O F SI 7-bit control
characters
CTRL/P 10 DLE 7-bit control
characters
CTRL/Q 11 DCI 7-bit control
characters
CTRL/R 12 DC2 7-bit control
characters