Specifications

4-77
SET/DEFINE/CHANGE Commands
SET/DEFINE/CHANGE PORT RLOGIN - PORT
SIGNAL SELECT
SET/DEFINE/CHANGE PORT RLOGIN (secure)
Syntax
Description
This command sets the Rlogin characteristics for the specified ports. The values in
effect when a Rlogin session is initiated will remain in effect for the session
lifetime. If these values are modified, any subsequent Rlogin connections will use
the new values.
Keyword
escape-character
Specifies the ASCII escape character for Rlogin.
suspend-input-character
Specifies the character used to suspend sending user input to the Rlogin server,
while still displaying the Rlogin server’s output. Entering the Rlogin escape
character followed by the Rlogin suspend input character will suspend input to
the Rlogin server. The default character is Ctrl/Y, but can be modified.
To resume sending input to the Rlogin server, enter the suspend-input-character
again.
suspend-io-character
Specifies the character used to suspend input to the Rlogin server and suspend
displaying the Rlogin output simultaneously. Entering the Rlogin escape
character followed by the Rlogin suspend IO character will invoke this feature.
The default character is Ctrl/Z, but can be modified.
To resume input and output, enter the suspend-io-character again.