Specifications

4-75
SET/DEFINE/CHANGE Commands
port-name
You must use the DEFINE PORT command to set the port’s default protocol to
match the protocol (LAT, Telnet, or Rlogin) of the preferred service. (The default
setting connects you to the first available port that offers the service.)
If your access server supports session management, refer to the Cabletron Network
Access Software Management guide for details about using session management
when a preferred service is defined.
Restriction
NODE and DESTINATION are valid only if you specify a LAT service as the
preferred service.
PORT QUEUING
(nonprivileged)
Syntax
Description
A nonprivileged option that specifies whether queuing of LAT service connection
requests is enabled for the port. (The default is DISABLED.) If you disable
QUEUING when requests are already queued, those requests remain in the queue
until the LAT service becomes available.
This option accepts a port-list or ALL as a parameter for the PORT keyword.
PORT REMOTE MODIFICATION
(nonprivileged)
Syntax
Description
A nonprivileged option that specifies whether a suitable LAT service node can
remotely modify port characteristics, such as SPEED, CHARACTER SIZE,
PARITY, and LOSS NOTIFICATION, to match the port characteristics of a remote
device on the access server. (The default is DISABLED.)
This option accepts a port-list or ALL as a parameter for the PORT keyword.