Specifications

4-51
SET/DEFINE/CHANGE Commands
PORT GROUPS
(nonprivileged)
Syntax
Description
A nonprivileged option that specifies which of the groups authorized for the port
(refer to the AUTHORIZED GROUPS command) are currently enabled on the
port (that is, your current groups). Use GROUPS to select the nodes and services
you want to display for the port. This command accepts a port-list or ALL as a
parameter for the PORT keyword.
When you log in to a port, all authorized groups are enabled for the port;
therefore, if port characteristics are reset to their defaults, the default for GROUPS
matches the default for AUTHORIZED GROUPS (that is, group 0 ENABLED and
all other groups DISABLED).
Use the group-list format with ENABLED or DISABLED to add or remove groups
(within the authorized list). Specify group-list without either ENABLED or
DISABLED to replace the existing list with a new list. Specify ALL to enable or
disable all authorized groups.
Keywords
group-list
One or more decimal codes ranging in value from 0 to 255, each representing a
LAT group code. Specify multiple codes by separating individual numbers with
commas, by specifying a range of numbers (in ascending order), or a combination
of both. For example, the group list 1, 3, 5-8, 14 specifies groups 1, 3, 5, 6, 7, 8, and
14
Restriction
You can specify GROUPS only with the SET PORT command.