User`s guide

WPIM Timeslot Configuration Table
Local Management User’s Guide 2-9
Figure 2-4 Sample Timeslot Configuration
Figure 2-5 shows a sample configuration for three sites. Of the 24 timeslots, Site #1 uses 16 to
communicate with Site #2 and the remaining 8 to communicate with Site #3. This configuration
varies tremendously depending on how the service provider maps out the T1 timeslots. The service
provider indicates which timeslots are active.
Figure 2-5 Sample Configuration
Site #1 is using the full T1, so all the timeslots must have an Interface assignment. Site #2 and Site
#3 use only a fraction of the T1, but the total quantity of timeslots must match those of Site #1.
Unused timeslots receive an Interface number of 000.
NOTE
The Interface numbers of Site #1, Site #2 and Site #3 do not have to match. Only the
quantity and position of timeslots must match (the service provider assigns the
timeslots).
SITE #1
SITE #2
Telco Cloud
24 Timeslots
16 Timeslots
SITE #3
8 Timeslots
1482_02
SITE #2
01-08
09-16
17-24
SITE #3
01-08
09-16
17-24
SITE #1
01-08
09-16
17-24
1482_03
005
005
000
005
005
000
005
005
000
005
005
000
005
005
000
005
005
000
005
005
000
005
005
000
000
000
006
000
000
006
000
000
006
000
000
006
000
000
006
000
000
006
000
000
006
000
000
006
005
005
006
005
005
006
005
005
006
005
005
006
005
005
006
005
005
006
005
005
006
005
005
006