User`s guide

Local Management
1-56 Local Management User’s Guide
Figure 1-21 IPX RIP Configuration Screen
2. Use the arrow keys to highlight the Port option.
3. Type in the number of the port that you wish to enable RIP routing and then press ENTER.
4. Use the arrow keys to highlight the Port Level RIP option.
5. Use the ENTER key to toggle the entry to ENABLED. Use the arrow keys to highlight the
SAVE command field at the bottom of the screen, and then press ENTER. The message
“SAVED OK” displays.
System Level RIP:
Port Level RIP:
RETURNSAVE+PORT-
DISABLED
DISABLED
IPX Address: xxx.xxx.xxx.xxx
Port: 1
IPX RIP CONFIGURATION
IPX Router ID: 0.0.0.0
<host name> Local Management Flash Image Version 02.XX.XX