User`s guide

SNMP Traps Screen

Local Management User’s Guide 1-23

SNMP Traps Screen

The SNMP Traps screen, shown in Figure 1-9, allows the user to conﬁgure the HSIM or

CyberSWITCH to send traps to as many as eight remote management workstations. SNMP traps

are messages about network events and device operational statistics. Access the SNMP Traps

screen from the Setup Menu screen by using the arrow keys to highlight the SNMP Traps option

and pressing ENTER. The SNMP Traps screen displays.

Figure 1-9 SNMP Traps Screen

Trap Table Screen Fields

The following deﬁnitions explain each of the SNMP Traps screen ﬁelds:

Trap Destination — Use this ﬁeld to enter the IP address of the management workstation

designated to receive SNMP traps from the HSIM or CyberSWITCH.

Trap Community Name — Use this ﬁeld to enter the community name of the management

workstation with the associated IP address. The community name indicates the “access level” of

traps that will be forwarded to the Trap destination.

Enable Traps — Use this ﬁeld to enable the transmission of SNMP traps to the management

workstation.

SNMP TRAPS

Trap Community NameTrap Destination Enable Traps

0.0.0.0

public

(NO)

SAVE

RETURN

201206

<host name> Local Management Flash Image Version: 02.XX.XX