User`s guide

Other Commands
Local Management User’s Guide 3-27
Options: -ea Enables the Inverse Multiplexer Application.
-da Disables the Inverse Multiplexer Application.
-eg <GROUPID> Enables the Inverse Multiplexer group designated by
<GROUPID>.
-dg <GROUPID> Disables the Inverse Multiplexer group designated by
<GROUPID>.
-ac <GROUPID> <INTERFACENUM> Adds the WAN channel
designated by <INTERFACENUM> to the Inverse Multiplexer group
designated by <GROUPID>.
-dc <GROUPID> <INTERFACENUM> Deletes the WAN channel
designated by <INTERFACENUM> from the Inverse Multiplexer
group designated by <GROUPID>.
<GROUPID> A unique value identifying an element in a sequence of
groups that belong to the WAN Inverse Multiplexer Application.
<INTERFACENUM> The MIB II ifIndex value used to represent a
WAN channel that has an appropriate datalink protocol associated
with it.
Example:
MIBNav-> imux
------------------------------------------------------------------------------------------------------------------------------------
WAN Inverse Multiplexer Status:
Number of WAN Inverse Multiplexer Groups currenly programmed: 1
Number of WAN Inverse Multiplexer Channels currenly programmed: 2
Group ID
1
1
Channel ID
2
1
2
1
1536000
1536000
291483387
292249652
(Kbits/sec)
Available BW
Physical Number
WAN
(bytes)
Xmit Byte Count
i