User`s guide

MIB Navigator
3-14 Local Management User’s Guide
PPP Security Command
The following is a command for PPP Security.
pppsecurity:
Syntax: pppsecurity <ifindex#><CHAP><direction><username><secret>
pppsecurity <ifindex#><PAP><direction><peerid><password>
pppsecurity <ifindex#><NONE>
Description: The pppsecurity command allows you to list and set PPP Security on an
interface basis.
Options: Not Applicable
Example:
The example below shows the syntax used to set interface 7 to CHAP
enabled.
Spoofing Command
The following is a command for Spoofing.
setspoof:
Syntax: setspoof <IF> <ON/OFF>
setspoof <IF> IPXRIP <TIME INTERVAL/ON/OFF>
setspoof <IF> IPXSAP <TIME INTERVAL/ON/OFF>
setspoof <IF> IPRIP <TIME INTERVAL/ON/OFF>
setspoof <IF> WDP <PACKETS COUNT/ON/OFF>
setspoof <IF> SPXWDP <PACKETS COUNT/ON/OFF>
setspoof <IF> NCPWAR <ON/OFF>
setspoof <IF> NCPMES <ON/OFF>
MIBNav-> pppsecurity 7 "CHAP" 1 "localcyberswitch" "localsecurityword"
MIBNav-> pppsecurity 7 "CHAP" 2 "remotecyberswitch" "remotesecurityword"