Specifications

Wide Area - 1 and 2 Configuration Windows

QuickSET Configuration Guide 71

Refer to the appropriate section listed below to conﬁgure your Wide Area 1 or 2 interface:

Wide Area T1 - Configuration Window

Wide Area E1 - Configuration Window

Wide Area DI - Configuration Window

Wide Area Synchronous - Configuration Window

Wide Area DDS - Configuration Window

Wide Area HDSL - Configuration Window

Wide Area ISDN Configuration Window

Wide Area T1 - Conﬁguration Window

The Wide Area T1 conﬁguration window is shown in Figure 78 below.

Figure 78 Wide Area T1 Conﬁguration Window

This section explains how to conﬁgure the Wide Area T1 interface using QuickSET.

The following deﬁnitions explain the ﬁelds in the T1 WAN conﬁguration window.

T1 Frame Type — Displays the T1 frame type. The selections are ESF (Extended Superframe)

and D4 (AT&T D4). The default setting for this ﬁeld is ESF.

NOTE

Your service provider (i.e., AT&T, Sprint, MCI, etc.) determines the settings for many of

the following ﬁelds. Consult your service provider for the correct settings.