Specifications

Ethernet Port Configuration
QuickSET Configuration Guide 69
System Passwords — The System Passwords window shown in Figure 77 displays after
clicking on the P
asswords button in the Ethernet 1 and 2 configuration window, or the Local
HSIM IP Address window.
The system passwords used by QuickSET are the same as the Community Names that are used in
Local Management through a TELNET application. System passwords allow you to control
management access by establishing three passwords. Each password controls a different level of
access.
Figure 77 QuickSET System Passwords Window
Once passwords are assigned, you must use the SuperUser System password at the User Password
prompt when initiating a QuickSET session. If you are configuring the device for the first time or if
no passwords are assigned, the default System password for each access level is preset to public.