Specifications

Configuration with QuickSET
66 QuickSET Configuration Guide
Ethernet Port Configuration
This section explains how to configure the Ethernet 1 and 2 fields (or Local HSIM Address) using
QuickSET.
Ethernet 1 and 2 Configuration Window
The Ethernet 1 and 2 configuration window, shown in Figure 74, displays after clicking on the
N
ext>> button in the Introductory window. The Local Ethernet IP address and Subnet Mask fields
shown on the Ethernet 1 and 2 configuration window are used for setting an IP address and Subnet
Mask.
Figure 74 QuickSET Ethernet 1 and 2 Configuration Window
If you are configuring an HSIM-W6 or HSIM-W84, you will see the Local HSIM IP Address
Window shown in Figure 75 on the following page, in place of the Ethernet 1 and 2 Configuration
Window shown in Figure 74 above.