Specifications

Configuration with QuickSET
48 QuickSET Configuration Guide
The following definitions explain the fields in the NAT Settings configuration window.
Ethernet address translation to Interface # — This pull-down menu is used to disable (OFF),
or enable NAT for an interface number. To enable NAT click the pull-down menu button and select
an interface number to run NAT through.
Figure 47 HSIM NAT Settings Configuration Window
Add Proxy... — Allows you to add NAT proxy servers. Click the Add Proxy... button and an
Add NAT Proxy Server window (Figure 48 on the following page) will appear. Enter an IP
Address, and select a Port number/type and a Protocol for each server entry.
Delete Proxy... — Deletes the NAT proxy server displayed in the NAT Proxy Server window.