Specifications

Bridging and Routing Configuration
QuickSET Configuration Guide 43
The DLCI and Interface Number define the switched connection to the Telco central office. Enter
the remote WAN MAC address and the remote Router’s WAN Network number.
Figure 41 IPX Host Map Window
This section describes the fields in the IP Advanced configuration window.
Interface # — Displays the active interface number (a two-digit decimal number related to the
Frame Relay Time Slot).
DLCI — Displays the Data Link Connection Identifier. Use this field to enter the DLCI, which is a
three-digit decimal number (from 16 to 991 inclusive) corresponding to the WAN virtual circuit
connection to the Telco central office.
WAN Network # — Displays the active IPX network number of the WAN connection. Use this
field to enter the WAN Network number.
Remote MAC Address — Displays the remote Ethernet MAC address. Use this field to enter the
remote MAC address of the device on the other end of the WAN link.