Specifications

Bridging and Routing Configuration
QuickSET Configuration Guide 39
To change the WAN Frame Type information, scroll through the list of interface entries, and select
the interface number you wish to modify by pressing the arrow button on the left side of the
Interface # field and press the M
odify... button. The WAN Frame Type window displays.
The WAN Frame Type window shown in Figure 37 below, allows you to select one of three frame
types to be used over the WAN for each interface: Native WAN, Encapsulated Ethernet, and
Encapsulated Ethernet SNAP.
Select the WAN Frame Type that you wish to enable by clicking the appropriate radio button.
When you are done, click the O
K button.
The O
K button returns you to the Bridging and Routing (WAN Frame Type) configuration
window.
Figure 37 WAN Frame Type Configuration Window
When you have completed Bridging and Routing (WAN Frame Type) configuration, click on the
N
ext>> button, and go to the Routing Configuration Window section.