Specifications

Configuration with QuickSET
14 QuickSET Configuration Guide
Figure 12 DI Tail Circuit Timing
The Tail Circuit (Figure 12, above) has the PBX as its timing source in site #1. The DI
functionality for Site #1 is set to Data From DI. The DI functionality for Site #2 is set to Enable.
The Transmit Clock Source must be set to Loop Timing at both sites for this configuration.
Figure 13 DI Internal Timing
Internal Timing — For the Internal Timing configuration shown in Figure 13, above, the clock
source is the WPIM-DI at Site # 1. DI functionality is set to Enable for both sites. Transmit Clock
Source must be set to Local Timing for site #1, and to Loop Timing for site #2.
T1 Frame Type — Displays the frame type. Click on the radio button to select either the ESF or
D4 option. The default setting for this field is ESF.
Clock:
Loop
Clock:
Loop
Clock:
Local
Clock:
Loop
Clock:
Loop
DINI
WPIM-DI
PBX
PBX
DINI
WPIM-DI
Voice
Voice
Voice/Data
Voice/Data
Site #1
Site #2
Telco Cloud
Clock:
Loop
Clock:
Local
Clock:
Loop
Clock:
Loop
Clock:
Loop
PBX
PBX
DINI
WPIM-DI
NIDI
WPIM-DI
Voice
Voice
Voice/Data
Voice/Data
Telco
Cloud
Site #1
Site #2