Specifications

Configuration with QuickSET
6 QuickSET Configuration Guide
Secondary IPs — The Secondary IPs window and Modify Secondary IP windows shown in
Figure 6 below. The Secondary IPs window displays after clicking on the S
econdary IPs... button
on the Ethernet 1 and 2 Configuration Window, and shows the list of current Secondary IP
addresses.
Figure 6 Secondary IPs and Modify Secondary Ip Windows
HSIMs and CyberSWITCHes can support multiple IP Subnets, therefore, there can be multiple
Secondary IP Addresses assigned to an Ethernet interface. To add a Secondary IP address, click on
the A
dd button and enter the IP Address, and Subnet Mask in their corresponding fields. Note:
only the CSX400 will have the Ethernet Interface # selection radio buttons.
If you wish to modify an existing entry, click the Modify button and the Modify Secondary IP
window, shown in Figure 6, appears. When you have modified the Secondary IP entry, click OK.
Click the Do
ne button when you have finished making changes.