Specifications

QuickSET - Pull-Down Menus

QuickSET Configuration Guide 145

Figure 159 Compression and Congestion Window

The Compression and Congestion window shows the type of compression employed (Hardware or

Software Compression) in the window’s title bar. The Compression and Congestion window lets

you to enable data compression on each interface. Data compression reduces the size of the data

being sent on a WAN link, effectively extending the link bandwidth.

To use data compression, the CyberSWITCH or HSIM must ﬁrst be fully conﬁgured and

connected to a live WAN link, and compression must be conﬁgured on any remote WAN device(s).

Using software compression, the device supports up to four DS0s (256 Kbps) per WPIM. With the

optional hardware compression module installed, the device supports data compression on all

DS0s, which is equivalent to two full T1 lines.

To modify an entry in the Compression and Congestion table, click the M

odify button. The

Modify Compression and Congestion window, shown in Figure 160, on the following page, will

be displayed.