Specifications

Configuration with QuickSET
144 QuickSET Configuration Guide
This section describes the modifiable fields of the TFTP /BootP Services window:
IP Address — The IP Address field shows the IP Address of the CyberSWITCH or HSIM being
upgraded.
Community — The Community field allows you to enter the password of your CyberSWITCH or
HSIM.
Gateway IP Address — Use the Gateway IP Address field to enter the IP Address of the server
acting as a gateway between the CyberSWITCH or HSIM and the TFTP server.
TFTP Server IP Address — The TFTP Server Address indicates the IP address of the PC
running this utility.
File Name — The File Name field indicates the location and name of the firmware image you are
putting on your CyberSWITCH or HSIM.
DownLoad — The DownLoad button starts the firmware download to your CyberSWITCH or
HSIM.
Runtime Configuration Menu
This section describes the pull-down menu options available from the Runtime Configuration
menu as shown Figure 158.
Figure 158 Runtime Configuration Pull-Down Menu
Compression and Congestion Window
The Compression and Congestion window shown in Figure 159 on the following page, displays
after you click on the Runtime Configuration pull-down menu and select C
ompression &
Congestion at the top of any QuickSET configuration window.