Specifications

Routing Configuration Window
QuickSET Configuration Guide 139
This section describes the fields in the IPX Advanced configuration window.
Interface # — Displays the active interface number (a two-digit decimal number related to the
Frame Relay Time Slot).
Alias — Displays an alias name that you assign to the active Interface Number.
DLCI — Displays the Data Link Connection Identifier. Use this field to enter the DLCI, which is a
three-digit decimal number (from 16 to 991 inclusive) corresponding to the WAN virtual circuit
connection to the Telco central office.
WAN Network # — Displays the active IPX network number of the WAN connection. Use this
field to enter the WAN Network number.
Remote MAC Address — Displays the remote Ethernet MAC address. Use this field to enter the
remote MAC address of the device on the other end of the WAN link.
Modify — This button displays the Modify IPX Host Window shown in Figure 151.
Add Host — This button displays the Add IPX Host Window shown in Figure 152 on the
following page.
Figure 151 Modify IP Host Window