Specifications

Routing Configuration Window
QuickSET Configuration Guide 135
The Add route window (shown below in Figure 145) appears when you click the Add button on
the OSPF Redistribute Routes window. Enter the new values for the route to be redistributed and
click O
K when you have finished.
Figure 145 Add Route
The IP Route Warning message (shown below in Figure 146) will appear if you incorrectly
specify the any of the parameters (i.e., subnet mask, Destination, or Next Hop) defining the static
route in the Add Route window. QuickSET checks the IP address and Mask, and will not accept an
incorrectly defined route.
Figure 146 IP Route Warning