Specifications

Configuration with QuickSET
120 QuickSET Configuration Guide
The WAN Frame Type window shown in Figure 131 allows you to select one of three frame types
to be used over the WAN for each interface: Native WAN, Encapsulated Ethernet, and
Encapsulated Ethernet SNAP.
Select the WAN Frame Type that you wish to enable by clicking the appropriate radio button.
When you are done, click the O
K button. The OK button returns you to the Bridging and Routing
(WAN Frame Type) configuration window.
Figure 131 WAN Frame Type Configuration Window
When you have completed Bridging and Routing (WAN Frame Type) configuration, click on the
N
ext>> button, and go to the Routing Configuration Window shown in Figure 132, on the
following page.