Specifications

Configuration with QuickSET
98 QuickSET Configuration Guide
The following section defines the Wide Area PPP Time Slot configuration windows.
Time Slots — A full line consists of 24 Time Slots (T1 and DI) or 31 Time Slots (E1) that are
each capable of up to 64 Kbps throughput. Using the PPP Protocol, up to 24 interfaces (T1 and DI)
or 31 interfaces (E1) can be assigned to the WAN link. Using the pull-down menu to the right of
each Time Slot field, select the interface number that you wish to assign to the Time Slot.
If you are configuring a WPIM-DI Time Slot table, any available Time Slots that are set to “00” are
mapped to the DI Interface. If you lease an entire T1 line, any Time Slots that are not used in the
Wide Area PPP Time Slot configuration window are used by the device connected to the DI
interface.
The interface numbers available in the pull-down menu are assigned in the Wide Area T1, E1, and
DI configuration windows. Selecting the Add I
nterface button or the Delete Interface button
allows available interface numbers to be added or deleted from each pull-down menu.
Clicking the Line Coding button displays the Line Coding window. For an explanation of line
coding functions, see Line Coding section.
When you have completed Wide Area PPP Time Slot configuration, click on the N
ext>> button,
and go to the General Configuration section.