User`s guide

USER’S GUIDE
78 CyberSWITCH
SUBADDRESSES
CONFIGURING A SUBADDRESS
USING CFGEDIT
1. To configure a subaddress, select ISDN Subaddress from the Physical Resources menu.
2. Enter the subaddress. The subaddress is supplied by your Carrier Service.
SUBADDRESS CONFIGURATION ELEMENTS
SUBADDRESS
The subaddress for the system.
SUBADDRESSES BACKGROUND INFORMATION
A subaddress may be configured for a point-multipoint line. This element is a call screening
method. A subaddress is only needed if you have a line interface type of point-multipoint, and you
choose the subaddress call screening method.
POTS OPTION
The dual-line, Plain Old Telephone Service (POTS) feature allows one or both of the ISDN B-
channels to alternatively be used with traditional phone equipment, including faxes and answering
machines.
There are three parts you must configure for the POTS option: the encoding standard, POTS line
information, and POTS information for individual devices.
CONFIGURING THE POTS OPTION
USING CFGEDIT
Configuring the Encoding Standard
To select the encoding standard:
1. Select Physical Resources from the main CFGEDIT menu.
2. Select POTS from the Physical Resource Menu.
3. Select Encoding Standard from POTS Menu.
4. Enter the Id of the encoding standard you wish to use (from displayed list).
C
ONFIGURING POTS LINE INFORMATION
To configure the POTS line information:
1. Select Physical Resources from the main CFGEDIT menu.