User`s guide

USER’S GUIDE
62 CyberSWITCH
3. Change the admin and guest system passwords.
If your system was previously accessed by your distributor, the preconfigured password will
be admin (in lower case). Change this password to secure your system. To make this change,
enter the following command at the system prompt:
pswd
Then follow the prompts to enter a new password. Your password must be a 3 to 16 nonblank
character string. Be careful, passwords are uppercase and lowercase sensitive.
RETURN CONFIGURATION TO FACTORY DEFAULTS
The default configuration files are located on the CSX150 Documentation and Set-Up diskettes.
If you wish to return to the default configuration, download the DEFLTCFG.OSW file. Follow
the same steps for Local or Remote Upgrade except download the file DEFLTCFG.OSW instead
of the UPGRADE.OSW file.
ACCESSING THE RELEASE NOTES
The Release Notes provide release highlights and important information related to this release that
should be reviewed before you begin the system’s installation and configuration.
The Release Notes are located on diskette as well as on the system’s FLASH file system.
The Release Notes on diskette are located in the REL_NOTE.TXT file. This file is a DOS text file you
can read on a DOS machine. Insert the diskette into the drive, change to the proper directory, and
enter the following command at the DOS prompt:
[drive]:\[platform directory][ISDN standard directory][option directory]> type
REL_NOTE.TXT | more
For example, if you are using drive D, you are installing a CSX156, using JAPAN ISDN standards
and the IP/IPX option, you would use the following path:
D:\CSX156\JAPAN\IPIPX> type REL_NOTE.TXT | more