User`s guide

USER’S GUIDE
602 CyberSWITCH
exit exits from Manage Mode and returns to the normal
system command mode
fileattr displays the current user file access rights (guest or admin)
fileattr change allows the current file access rights configuration data to
be changed
help displays a list of the valid Manage Mode commands
hwfilt displays the current hardware filter configuration
hwfilt [add/change/delete] adds/changes/deletes the current hardware filter
configuration
hwfilt [enable/disable] enables/disables the current hardware filter
ipfilt updates the IP filter configuration
ipnetif displays the current IP network interface configuration
data
ipradius displays current enabled status of IP route lookup via
RADIUS
ipradius off disables lookup of IP routes via RADIUS
ipradius on enables lookup of IP routes via RADIUS
iprip displays selected type of RIP information
iprip [off/on] disables/enables RIP
iproute displays the current IP static route configuration data
iproute [add/change/delete] adds/changes/deletes an IP static route
ipxaddrpool displays current IPX address pool
ipxaddrpool [add/change/delete] adds/changes/deletes an IPX address from the IPX
address pool
ipxinet allows you to enter the network number for the IPX router
ipxiso allows you to enable/disable IPX isolated mode
ipxnetif displays current IPX network interface data
ipxnetif [add/change/delete] adds/changes/deletes an IPX network interface
ipxrip displays the current IPX RIP status (enabled or disabled)
ipxrip [off/on] disables/enables IPX RIP
ipxroute displays current IPX routes
ipxroute [add/change/delete] adds/changes/deletes an IPX route
Command
Use