User`s guide

USER’S GUIDE
594 CyberSWITCH
cdr stats clear (GUEST) clears current call detail recording statistics
cdr verify (GUEST) verifies call detail recording servers are configured
cfg provides information on changes to configuration files
cfgedit starts the CFGEDIT configuration utility
cls (GUEST) clears administration screen
cmp stats displays the compression connection statistics for all
active connections
cmp stats <device name> displays the compression connection statistics for the
specified device
cmp clear <device name> clears all the compression statistics for the specified device
cmp clearall clears all active connection compression statistics
cr stats displays the call restriction statistics
cs (GUEST) displays connected device information
date <month, day, year> changes the date as specified
del <filename> deletes specified file
dhcp stats displays DHCP statistics
dhcp stats clear clears DHCP statistics
diags pots <device-
number><parameter>
for the POTS option:
runs interactive diagnostics including ringing, tone generation,
and DTMF detection
while diagnostics are run, no incoming calls are accepted
the following parameters are supported:
ring feed - generates ring feed while device is OffHook
digits_detection on - echoes digits being pressed
digits_detection of - disables echo of pressed digits
busy_tone - generates busy tone while device is OffHook
reorder_tone - generates reorder tone while device is OffHook
dial-tone - generates dial tone while device is OffHook
ring_tone - generates ring tone while device is OffHook
hook_switch - waits briefly for hook switch flash, on detection
displays "HSF detected"
diags pots test ringer equiv for the POTS option:
briefly generates the alternate ring tone while both devices
are OnHook
dir displays all files in flash file system
disc device <device name> disconnects all calls to the specified device
dr (GUEST) displays message reports
Command
Use