User`s guide

USER’S GUIDE
36 CyberSWITCH
CYBERSWITCH SERIES
Front & Back Panels:
Back Panel as illustrated supports:
• Wide Area Network (WAN) through 1 BRI line, two connections
• Local Area Network (LAN) through the 10Base-T Ethernet port or through the 10Base2 Ether-
net port
• analog devices (up to two) through the dual POTS interface
C
YBERSWITCH FRONT PANEL
The front panel of the system has several LED indicators. These include:
• Power - remains lit while the unit is on.
• Service - denotes something needs attention in the system. The only red indicator.
• The LAN indicators: TX, RX, and 10BaseT. These light to indicate transmissions, receptions, or
good link integrity on the 10Base-T port.
• The WAN indicators: CH-1, CH-2, D-Chan, and Sync.
When Sync is lit, it indicates the line is connected and synchronized.
When D-Chan is lit, it indicates the D channel is up and operational.
When CH-1 or CH-2 blinks, it indicates data traffic on the specific channel.
When CH-1 or CH-2 is lit continuously, it indicates that a call has been established.
For more detailed LED indicator information, refer to the LED Indicators chapter.
BRI Term 10BT 10B2 Console DCPower Reset
1 2
Termination switches for
Multipoint Connections
WAN
Port
Ethernet
LAN Port
(
twisted pair
)
Dual
POTS
LAN Port
(thinwire coax)
Console Port / AMP
Small Office Remote Access Switch