Manualshelf

User`s guide

ManualsBrandsCabletron Systems ManualsComputer equipmentCyberSWITCH CSX500
321322323324325326327328329330
USER’S GUIDE
326 CyberSWITCH
Disconnect Event Report Contents
On a disconnect event, records 1 through 4 are used. The event type is DISCONNECT. The
timestamp reflects the time that the decision to disconnect was made. The phone number displayed
is the phone number in the Connect report.
The duration is calculated by subtracting the connect event time from the disconnect time.
The following is an example disconnect event report:
Chicago-Schaumburg 00000001 DISCONNECT 1 OF 4 MonroeCounty PORT 1/1/1
Chicago-Schaumburg 00000001 DISCONNECT 2 OF 4 IN FROM 3135551212
Chicago-Schaumburg 00000001 DISCONNECT 3 OF 4 64Kb 08/16/95 23:11:55
Chicago-Schaumburg 00000001 DISCONNECT 4 OF 4 DURATION 01:11:55
Reject Event Report Contents
On a reject event, records 1 through 4 are used. The event type is REJECT. The timestamp reflects
the time that the decision to disconnect was made. An incoming phone number is displayed if it is
provided by the telephone switch. Not all switches provide calling line identification. A phone
number is always displayed for outbound calls.
The duration is calculated by subtracting the ISDN connection timestamp (the time that the ISDN
connect message was received from the switch) from the reject event timestamp.
The following is an example reject event report:
Chicago-Schaumburg 00000001 REJECT 1 OF 4 UNKNOWN PORT 1/1/1
Chicago-Schaumburg 00000001 REJECT 2 OF 4 IN FROM 3135551212
Chicago-Schaumburg 00000001 REJECT 3 OF 4 64Kb 08/16/95 23:11:55
Chicago-Schaumburg 00000001 REJECT 4 OF 4 DURATION 00:00:07
System Up Event Report Contents
On a System Up event, only record 1 is used. The event type is SYSTEM UP. No data is filled in for
the Remote Device Name field or the Port field.
The following is an example reject event report:
Chicago-Schaumburg SYSTEM UP 1 OF 1
Verify Event Report Contents
On a Verify event, only record 1 is used. The event type is CDR VERIFY. No data is filled in for the
Remote Device Name field or the Port field.
The following is an example verify event report:
Chicago-Schaumburg CDR VERIFY 1 OF 1