User`s guide

Small Office Remote Access Switch 221

ONFIGURING

DVANCED

IP R

OUTING

Static Route Lookup via RADIUS

ISOLATED MODE CONFIGURATION ELEMENTS

ISOLATED MODE STATUS

You may enable or disable the Isolated Mode option.

ISOLATED MODE BACKGROUND INFORMATION

When operating with isolated mode enabled, the CyberSWITCH does not relay IP datagrams

received from the WAN to other IP routers/hosts located on the WAN. IP datagrams received from

the WAN will be discarded if they need to be forwarded over the WAN. IP datagrams received on

the LAN interface are forwarded to each required interface.

WAN-to-LAN and LAN-to-LAN routing still works if Isolated Mode is enabled.

STATIC ROUTE LOOKUP VIA RADIUS

Note: This option is only applicable when a RADIUS Server is in use.

CONFIGURING STATIC ROUTE LOOKUP VIA RADIUS

USING CFGEDIT

1. Select Static Route Lookup via RADIUS (Enable/Disable) from the IP menu.

2. Follow the onscreen instructions to either enable or disable this feature.

SING MANAGE MODE

ipradius

Displays the current enabled status of the IP route lookup via RADIUS feature.

ipradius off

Disables the lookup of IP routes lookup via RADIUS.

ipradius on

Enables the lookup of IP routes lookup via RADIUS.

STATIC ROUTE VIA RADIUS CONFIGURATION ELEMENTS

STATIC ROUTE VIA RADIUS STATUS

You may enable or disable this option.

STATIC ROUTE LOOKUP VIA RADIUS BACKGROUND INFORMATION

The Static Routes Lookup via RADIUS option allows you to maintain static routes for devices on

the RADIUS Server. When there are multiple CyberSWITCHes at one site, the IP static routes

information needs to be duplicated on all systems. The Static Route Lookup via RADIUS feature

allows you to maintain all of the IP static routes information for multiple systems on the RADIUS