Specifications
Table Of Contents

Introduction Software Release Notice for 5.0rev1
1-2 CS2 and MMS2
Purpose of CS2 and MMS2
The CS2 and MMS2 software portions of the CD perform the following
functions for SPECTRUM 5.0rev1.
• The CS2 software provides an interim solution to problems and anomalies
associated with SPECTRUM 5.0rev1. It consolidates previous off-cycle
releases (Patches) and provides solutions to some problems not previously
addressed. As a Core Supplement release, CS2 provides solutions to issues
affecting the SPECTRUM Core, the Core Management Modules, and such
SPECTRUM applications as ArchMgr and Reports. CS2 does not provide
solutions to device management issues associated with the management
modules. Such issues are addressed in the MMS2 software.
See Chapter 3,
CS2 Software Characteristics
, for details on the CS2
software.
See Chapter 6,
Files Shipped With CS2
, for a list of the files shipped with
CS2.
• The MMS2 software provides the SPECTRUM 5.0rev1 management
modules included in MMS1, some of which have been updated, plus
additional management modules produced since the release of MMS1. The
MMS2 software is installed selectively after installing CS2; in other
words, you
must
install those management modules that have been
previously installed in your SPECTRUM database and you
should
install
any additional management modules that you have purchased.
See Chapter 4,
MMS2 Software Characteristics
, for details on the MMS2
software and listings of the management modules included in MMS2.
NOTE
As a minimum, all of the management modules in your current SPECTRUM
database must be re-installed from the MMS2 software in order for your
SPECTRUM 5.0rev1 system to operate properly. Installation of MMS2
requires a Key provided with the CD. This Key ensures the extraction of the
management modules you have purchased.