Specifications

Software Superseded by CS2/MMS2 Software Release Notice for 5.0rev1
5-2 CS2 and MMS2
Patches Originally Superseded by CS1/MMS1
The following SPECTRUM 5.0rev1 off-cycle releases (Patches) were originally
superseded by the CS1/MMS1 software and are now being superseded by the
CS2/MMS2 software.
SPECTRUM_5.0rev1.P01
Obsoleted by P16.
SPECTRUM_5.0rev1.P02
AutoDiscovery is requesting process status every 2-5 seconds.
AutoDiscovery is not reading all ranges in list.
When using the DisSysOIDList function and running AutoDiscovery, for each
device in the network that answers the sysOID request and each device that
does not match what is in the DisSysOIDList attribute, the SnmpPif is being
created but not removed.
The AutoDiscovery status window blanks out or freezes after P49 patch is
installed.
After you start AutoDiscovery while Online Backup is running, AutoDiscovery
will not stop until the Online Backup is complete.
SPECTRUM_5.0rev1.P03
Obsoleted by P11.
SPECTRUM_5.0rev1.P04
A request has been made to add a "flagable" option so that child attribute
information is not gathered. Without it, the Server pegs at 98% for the time
(3+minutes) it takes to gather attributes.
The mask strings stored in the description field for a 4.0rev3 configuration are
not shown in the Mask window when that configuration is imported into 5.0.
Capturing of host configurations from a HubCat5000 (having brought up Ecm
through the CatStackAPP application) fails.
Capturing a host configuration from a router by following the directions in the
user's manual fails.
After creating and saving a template with all attributes, select the template.
No attributes show on the right hand side where the list usually is.
SPECTRUM_5.0rev1.P05
Generating multiple html reports gives the same header for each.
There are problems with printing to A4 paper in tabular reports.
Change scheduled reports to use SpectroSHELL.