Specifications

9032277-03 MMS2 Software Characteristics
4-7
SM-3CM1004, SM-3CM1007, SM-3CM1008, SM-3CM1011
All Devices
Device models go red rather than orange when the SNMP agent fails.
SM-3CM1011
3Com LinkSwitch 1100/3300
When in the Device Chassis view, selecting Print from the File menu and
then clicking Print View and OK results in a distortion of the images on
the right side of the view.
SM-BAY1000
HubBayStack 450
1. On UNIX, there is a default gib displaying for the Detail view that is
accessed from the subview menu of the ports in the Device, Logical, and
Devtop (BS450_24 board) views.
2. The Chassis Configuration and Chassis Group views do not display when
accessed via the Large Device icon.
Solution: Access the view from a Small Device icon.
3. When the HubBaySt450 is connected to a Lan or Universe container, the
off-page reference is a Large Device icon instead of the triangular OPR
icon.
SM-CAT1002
HubCat5509
If the HubCat5509 management module is installed, this device type may
be used instead of the GnSNMPDev device type when discovering devices
that do not have a management module installed.
Solution: Destroy the model and create a new one using Create by Model
Type, selecting the GnSNMPDev device type.
SM-CAT1005
Catalyst 2900
When in the Device view of the HubCat29xx and selecting Port
Configuration off of Port1, you will see red boxes around the information
area while other ports appear OK.
SM-CIS1002
LightStream 1010
1. The PNNI_App is not fully supported for LS_1010. There are red boxed
attributes in the Node Statistics view and PNNI Node Timer view.