Specifications

9032277-03 MMS2 Software Characteristics
4-5
SM-CSI1030
SmartSwitch 9000 (9E132_15)
When a SmartSwitch 9000 is modeled using a Gen9000 Model Type, the
serial number for the device is not displayed in the Banner of the
Configuration, Performance, and Model Information views.
SmartSwitch 9000 (9E133_36)
When a MMAC+ card is modeled, the serial number attribute (0x10030) is
filled in with device data. When the card is replaced in the chassis, next
time the view is brought up the serial number is the same.
SM-CSI1064
ELS100-24TX
This device fails to autodiscover and its model gets placed in Lost &
Found.
SM-CSI1066
SmartSwitch 9000 (9H421_12)
1. The Port Bridging Status displays UNK (unknown) in the Device Chassis
and Device Interface (Bridging mode) views.
2. When a SmartSwitch 9000 is modeled using a Gen9000 Model Type, the
serial number for the device is not displayed in the Banner of the
Configuration, Performance, and Model Information views.
SM-CSI1076
6E132-25 (Ds3App1407)
1. The Model Information view and DS3/E3 Configuration view contain ???
in some of the information fields.
Solution: In the Configuration view, change the read modes for the
attributes to ReadInstance and ReadWriteInstance.
2. The Ds3App1407 name is not visible when the Application view is in List
mode.
Solution: Place the mouse pointer over the branch where the name should
be located to view the pop-up description. Use the right mouse button to
view and select the applications subview menu.