Specifications

MMS2 Software Characteristics Software Release Notice for 5.0rev1
4-2 CS2 and MMS2
10. A new Beta management module (SM-CAT1005) supporting the Catalyst
2900 devices.
11. A new Beta management module (SM-CSI1095) supporting the Cabletron
STS16 Token Ring Switch.
12. WS-X5225R EtherChannel Board for the Catalyst 5000 in SM-CAT1002.
13. Catalyst 5509 in SM-CAT1002.
14. CSX5500 in SM-CSI1077.
15. Cabletron TRMIM-62A in SM-CSI1025.
16. Management of the SmartSwitch 9000 EM module COM ports.
17. ELS100-24TXM and ELS100-24TXG in SM-CSI1064.
18. CoreBuilder 3500 in SM-3CM1006.
19. Cascade/Router ports and improved AutoDiscovery in SM-3CM1009.
20. Ericsson MIB rev 1.13 in SM-ERC1000.
Problems Resolved in MMS2
The following problem resolutions have not been addressed in any previous
off-cycle releases.
1. Synoptics 28200 devices, currently unsupported, can now be modeled as
GnSNMPDev.
2. CtTokenRingApp has been included in the Primary Application list.
3. The DevTop view of a 7A06 now displays the ports correctly. Previously,
interface ports in the DevTop view were showing ??? for Interface number.
This problem occurred when a 7A06-01 module had two A-PIMs installed,
one being used for redundancy and, therefore, in a disabled state.
4. Reporting can now be done on the SysResApp application model for
devices supporting this application.
5. A user can now connect StckRptrRev4 to CSIIfPort of 9H423_28.
6. When AutoDiscovery is run on the 3Com SuperStack II Token Ring Hub
module, one of the Applications no longer ends up incorrectly collected by
a Network model.
7. AutoDiscovery no longer places ELS100-24TX in the Lost & Found view.
8. ATMDISC no longer moves ForeRunner models to the Universe view.
9. ForeSwitchApp is now resolved to the appropriate ForeRunner interface,
not automatically to ASX0.