Specifications

9032277-03 Installation
2-3
6. Enter the user name of the person performing the installation in the
Target Ownership field. This should be a login name other than root or
Administrator.
7. Click OK to install.
WARNING
WARNING
Do not manually deselect components via the Component Selection window.
The Install program will automatically select and install those CS2
components that are applicable to your current SPECTRUM installation.
Manual deselection of components may result in installation failure and/or
incorrect product installation. You may, however, do SpectroSERVER-only or
SpectroGRAPH-only installations.
NOTE
If you install the CS2 portion of the CD and get any of the following errors
while linking the SpectroSERVER, you need to install the MMS2 portion of
the CD:
Undefined first referenced
symbol in file
__0oKCsIHRtrSumctR6NCsMTypeHandleP6NCsAttrValListTCRC6LCsRel
HandleUl Cs8021QMI.o
__0fMCsIHIfConfigQinterface_changeRC6NCsModelHandle
ih.a(CsIHNbldrIf.o)
__0fTCsIHDeviceIsolationQassert_conditionRC6NCsModelHandleUlNCC
ih.a(CsIHChsIsol.o)
__0fMCsIHRPAMaintQcheck_against_PARC6NCsModelHandleP6ICsIPAdd
r ih.a(LbIHMPPALMn.o)
__0oKCsIHIfStatctR6NCsMTypeHandleUlNDCP6Iadmin_op
CsATMIfPtMI.o
ld: fatal: Symbol referencing errors. No output written to SpectroSERVER
/usr/ccs/bin/nm: SpectroSERVER: No such file or directory
**^G Error during Link of SpectroSERVER
chown: SpectroSERVER: No such file or directory
chmod: WARNING: can't access SpectroSERVER
**^G Error during chmod u+s of SpectroSERVER