User`s guide

CSX200 Configuration with QuickSET
80 CSX200 Family User’s Guide
NAT Settings Configuration Window
The Network Address Translation (NAT) Settings configuration window shown in Figure 36
displays after clicking on the NAT Settings... button in the Advanced Routing configuration
window. The NAT Settings configuration window is used to set up Network Address Translation
on an Ethernet port.
Figure 36 NAT Settings Configuration Window
The following definitions explain the fields in the NAT Settings configuration window.
Ethernet address translation to Interface # — This pull-down menu is used to disable (OFF)
or enable NAT for an interface number. To enable NAT click the pull-down menu button and select
an interface number to run NAT through.
Add Proxy... — Allows you to add NAT proxy servers. Click the Add Proxy... button and an
Add NAT Proxy Server window (Figure 37) displays. Enter an IP Address, and select a Port
number/type and a Protocol for each server entry.