User`s guide

CSX200 Configuration with QuickSET
CSX200 Family User’s Guide 71
The WAN Frame Type window shown in Figure 30 allows you to select one of three frame types
to be used over the WAN for each interface: Native WAN, Encapsulated Ethernet, and
Encapsulated Ethernet SNAP. Select the WAN Frame Type that you wish to enable by clicking the
appropriate radio button. When you are done, click on the O
K button. The OK button returns you
to the Bridging and Routing (WAN Frame Type) configuration window.
Figure 30 WAN Frame Type Configuration Window
Once the Bridging and Routing (WAN Frame Type) configuration is complete, click on the
N
ext>> button and go to the Routing Configuration Window section.